Nami Sanat Co.

Menu ccc


PR/4116, PR/4116,PR/411,PR/41,PR/4,PR/,PR,P, ,نامی صنعت,تجهیزات صنعتی برق صنعتی,namisanat,نامی صنعت,تجهیزات صنعتی,نمایندگی فروش سایر برند ها,نمایندگی فوش ایر برند های ABB,IFM,ind.power,برق صنعتی ,ind,power,برق, صنعتی ,PR 4116 is designed as a SIL 2 device with a high safety level. Therefore, a continuous measurement of the outgoing current is carried out on a 4...20 mA and 20...4 mA output signal. If the current output signal is different from the internal calculated output value or the current output is 0 (due to e.g. an open circuit breakage), an error mode switches on the red front LED and disables the relays. This function is not a default option but must be actively selected via the programming menu (S4-20 & S20-4). The error mode can only be reset by switching off and then switching on the supply voltage to the device.,Input for RTD, TC, Ohm, potentiometer, mA and V  2-wire supply > 16 V  FM-approved for installation in Div. 2  Output for current, voltage and 2 relays  Universal AC or DC supply,Universal transmitter Input for RTD, TC, Ohm, potentiometer, mA and V 2-wire supply > 16 V FM-approved for installation in Div. 2PR/4116, PR/4116,PR/411,PR/41,PR/4,PR/,PR,P, ,نامی صنعت,تجهیزات صنعتی برق صنعتی,namisanat,نامی صنعت,تجهیزات صنعتی,نمایندگی فروش سایر برند ها,نمایندگی فوش ایر برند های ABB,IFM,ind.power,برق صنعتی ,ind,power,برق, صنعتی ,PR 4116 is designed as a SIL 2 device with a high safety level. Therefore, a continuous measurement of the outgoing current is carried out on a 4...20 mA and 20...4 mA output signal. If the current output signal is different from the internal calculated output value or the current output is 0 (due to e.g. an open circuit breakage), an error mode switches on the red front LED and disables the relays. This function is not a default option but must be actively selected via the programming menu (S4-20 & S20-4). The error mode can only be reset by switching off and then switching on the supply voltage to the device.,Input for RTD, TC, Ohm, potentiometer, mA and V  2-wire supply > 16 V  FM-approved for installation in Div. 2  Output for current, voltage and 2 relays  Universal AC or DC supply,Universal transmitter Input for RTD, TC, Ohm, potentiometer, mA and V 2-wire supply > 16 V FM-approved for installation in Div. 2PR/4116, PR/4116,PR/411,PR/41,PR/4,PR/,PR,P, ,نامی صنعت,تجهیزات صنعتی برق صنعتی,namisanat,نامی صنعت,تجهیزات صنعتی,نمایندگی فروش سایر برند ها,نمایندگی فوش ایر برند های ABB,IFM,ind.power,برق صنعتی ,ind,power,برق, صنعتی ,PR 4116 is designed as a SIL 2 device with a high safety level. Therefore, a continuous measurement of the outgoing current is carried out on a 4...20 mA and 20...4 mA output signal. If the current output signal is different from the internal calculated output value or the current output is 0 (due to e.g. an open circuit breakage), an error mode switches on the red front LED and disables the relays. This function is not a default option but must be actively selected via the programming menu (S4-20 & S20-4). The error mode can only be reset by switching off and then switching on the supply voltage to the device.,Input for RTD, TC, Ohm, potentiometer, mA and V  2-wire supply > 16 V  FM-approved for installation in Div. 2  Output for current, voltage and 2 relays  Universal AC or DC supply,Universal transmitter Input for RTD, TC, Ohm, potentiometer, mA and V 2-wire supply > 16 V FM-approved for installation in Div. 2

PR/4116

other Brands / other Brands

Group: Ind. Power

Subgroup: Relay

SubSubgroup: Other Relays

Brand: other Brands

Detail:

PR/4116 

accessory: 4501

DATASHEET

Similar Products

You can sign up to our news letter for more information about our products: Sign up Now !